Introduction
The Nyboard V1 used by robot uses the Atmel ATMEGA328P controller, which only supports only one serial port. We separate the serial port of Nyboard to support more modules. The pins of the serial port are compatible with the 6-pin Arduino Pro Mini. Pin definitions are shown in the table below:
Pin No.
Name
Usage
1
DTR
Modem signal DTR, reset NyBoard after serial download finished.
2
RX
ATMEGA328P RX (receive)
3
TX
ATMEGA328P TX (send)
4
5V
5V power for MCU and chips
5
GND
Ground
6
GND
Ground
The default serial baud rate is 115200bps.
There're 3 communication modules for the NyBoard V1:
Export as PDF
Copy link