Petoi Doc Center
🇺🇸English
🇷🇺Русский🇨🇳中文版🇺🇸English🇹🇭 Thai
🇺🇸English
🇷🇺Русский🇨🇳中文版🇺🇸English🇹🇭 Thai
  • Welcome to Petoi Doc Center
  • Getting Started Guide
  • 🙋‍♂️FAQ(Frequently Asked Questions)
  • Petoi robot joint index
    • Joint Pins on NyBoard
      • Nybble
      • Bittle
    • Joint Pins on BiBoard V0
      • Bittle X
      • Bittle X+Arm
    • Joint Pins on BiBoard V1
      • Bittle X
      • Bittle X+Arm
      • Nybble Q
  • Bluetooth Connection
    • BiBoard
    • NyBoard
  • Upload Firmware
    • NyBoard
    • BiBoard V0
    • BiBoard V1
  • Joint Calibration
  • Infrared Remote
    • Remote Controller
  • Mobile App
    • Introduction
    • Calibrator
      • Nybble
      • Bittle
    • Controller
  • Desktop APP
    • Introduction
    • Firmware Uploader
      • NyBoard
      • BiBoard V0
      • BiBoard V1
    • Joint Calibrator
      • NyBoard Preparation
      • BiBoard Preparation
      • Nybble
      • Bittle / Bittle X
        • Bittle (NyBoard)
        • Bittle X (BiBoard V0)
        • Bittle X (BiBoard V1)
      • Bittle X+Arm
        • BiBoard V1
        • BiBoard V0
    • Skill Composer
      • NyBoard Connection
      • BiBoard Connection
      • Interface
        • Nybble
        • Bittle / Bittle X
        • Bittle X+Arm
    • Tools
  • Block-based programming
    • Petoi Coding Blocks
      • NyBoard Preparation
      • BiBoard Preparation
    • Block-based Coding Curriculum - Learn Quadruped Robotics for Beginners
    • Python coding mode in Mind+
    • Generic Arduino Uno Blocks
    • Install Mind+ on Chromebook
  • Arduino IDE
    • Upload Sketch for NyBoard
    • Upload Sketch for BiBoard
    • Calibrate the joints with Arduino IDE
    • Serial Monitor
    • C++ Curriculum: Learn Quadruped Robotics for Beginners
    • Install Arduino IDE on Chromebook
  • Free Curriculum
    • 📚Download
  • APIs
    • 🖇️Serial Protocol
      • Feedback servos
      • Nested task queue and signal generator
    • 🐍Python API
    • 🐛8266 MicroPython controller
      • Run MicroPython on ESP8266
      • Setup WebREPL
      • Using the ESP-NOW protocol
    • 🦎8266 Arduino C Controller
    • ©️C++ API
    • 🍓Raspberry Pi serial port as an interface
      • For BiBoard V1
    • 💻Set up Development Environment on Chromebook
    • 🤖ROS
  • Nyboard
    • Overview
    • NyBoard V1_0
    • NyBoard V1_1 & NyBoard V1_2
  • BIBOARD
    • BiBoard V0 Guide
    • BiBoard Extension Hat
    • Demo Applications
      • 1.GPIO port
      • 2.Serial port
      • 3.Analog-digital converter
      • 4.Digital-Analog Converter
      • 5.EEPROM (Electrically Erasable Programmable read only memory)
      • 6.Gyro IMU（MPU6050）
      • 7.Infrared remote control
      • 8.PWM(Pulse Width Modulation)
      • 9.Servo(under construction)
      • 10.Classic Bluetooth serial port SPP
      • 11.Bluetooth low energy (BLE) serial port pass-through
      • 12.File system SPIFFS
      • 13.Add hardware partition configuration option in Arduino IDE
      • 14.Play MP3
      • 15.The usage of Wi-Fi OTA(Over-The-Air)
    • BiBoard V1 Guide
  • Communication Modules
    • Introduction (For NyBoard)
    • USB Uploader (CH340C or CH343G)
    • Dual Mode Bluetooth
    • WiFi module ESP8266
      • ESP8266 + Python Scripts Implement wireless crowd control
  • Extensible Modules
    • Introduction
    • MU Camera
    • Ultrasonic Sensor
    • Light Sensor
    • Touch Sensor
    • Gesture Sensor
    • PIR Motion Sensor
    • IR Distance Sensor
    • Voice Command Module
    • Petoi AI Vision Module
    • Advanced development and application of AI vision modules
      • Model Training
      • Model quantification
      • Model deployment
      • Training on the COCO DIY dataset
    • Robot Arm
      • Upgrade your older Bittle/Bittle X for the robotics arm gripper
    • 🎮Joystick with Micro:Bit
  • Applications
    • Melody Creation
    • Skill Creation
    • OpenCat Imitation Tutorial
    • Programmable Puppet Character
    • Tutorial for simulating Bittle In Isaac Sim
  • History
    • Upload Sketch For NyBoard (software 1.0)
  • Technical Support
    • 💾Supporting Application and Software
    • 🔧Burn Bootloader for NyBoard
    • 🛠️Useful Tools
    • 🔋Battery
  • Useful Links 🕸
    • 🔭Home of Petoi Robots
    • 🛒Shop Coding Robots
    • 💿GitHub of OpenCat
    • 🎪PetoiCamp (Forum)
    • 📽️Petoi Robot Videos
    • 📬Users' repositories
Powered by GitBook
On this page

Was this helpful?

Export as PDF
  1. Upload Firmware

NyBoard

PreviousUpload FirmwareNextBiBoard V0

Last updated 2 months ago

Was this helpful?

When you use a to upload the firmware for the NyBoard, if there is no serial port in the port list of Device Manager.

Please download and install the USB driver:

Mac:

Windows:

Linux:

http://www.wch-ic.com/download/CH341SER_MAC_ZIP.html
http://www.wch-ic.com/downloads/CH341SER_EXE.html
http://www.wch-ic.com/downloads/CH341SER_LINUX_ZIP.html
USB uploader
Nybble
Bittle